Aquasonic pH-Down is for reducing alkalinity. Made from high grade chemicals and works instantly. Treatment: Used to quickly lower pH Result: Will lower pH. Varies according to initial pH. Dose Rate: 1 teaspoon per 70 litres in a 12hr period. Use until desired pH is reached.

Read more less

API MARINE ALGAEFIX algae control effectively controls these types of saltwater algae: Green algae (Cladophora), “Red Slime” (Oscillatoria & Spirulina major), “Brown Algae” (Cyclotella), in saltwater aquariums containing live corals, invertebrates, and fish. API MARINE ALGAEFIX algae control does not discolour water or cause foaming and does not contain copper.

Read more less

Ammo-gone will neutralise ammonia, chlorine and chloramines, in fresh or salt water. When neutralising ammonia, use an Aquasonic Ammonia Test Kit to determine the level of ammonia present and the increase or decrease the dosage proportionally to neutralise it in one dose. In areas where ammonia or chloramines are a problem in tap water, Ammo-gone is essential. Use each time a new aquarium is installed, when water changes are made or transporting fish. If mixing salt water for marine aquariums, use Ammo-gone. Following the use of of Ammo-gone, use Aquasonic Water Conditioning Salts to create that ideal habitat. For trouble free saltwater, use Aquasonic Ocean Natures Sea Salt. For aquarium use only. Keep out of reach of children.   Directions for Use: To neutralise chlorine or chloramines use 5ml per 20L of water. To neutralise ammonia, 5ml per 20L of water neutralise 0.75ppm ammonia. Ammo-gone has no effect on marine salts and can be use with invertebrates. Always treat new water before adding to your aquarium.   Note: Ammo-gone may bleach clothing if accidentally spilled. Ammo-gone may cause faulty readings with ammonia test kits that use Nessler's reagents.  

Read more less

Use Power Water Conditioner when starting up an aquarium to remove chlorine and chloramines which can be very harmful to aquarium fish. Power also contains elements that will remove heavy metals from the aquarium. Fungal inhibitors have also been added to help guard against infections.   Directions for Use: 1ml per 10L of water. Use Power when starting up a new aquarium or when adding water for a water change. Premix Power with tap water before adding to aquariums containing fish. After using Power in freshwater aquariums always add Aquasonic Water Conditioning Salts to maintain that natural environment for your fish. In marine aquariums, use Power before the addition of Aquasonic Ocean Nature Sea Salt.

Read more less

Certain water conditions restrict the ability of saltwater to foam and this in turn limits the activity of protein skimmers to extract waste. Many factors could be at fault, from the calcium hardness of the water, excretions of certain inhabitants or the oil from a fish food. Aquasonic Reefoam overcomes these foam inhibitors without affecting essential water quality parameters and creates ideal conditions for protein skimmers to remove waste.   Directions for Use: 5ml per 40L of water. More or less may be required according to the water conditions present. Aquasonic Reefoam is not harmful to inhabitants, however it should be used on a need to use basis. If a protein skimmer produces clean foam waste after using Aquasonic Reefoam, then the aquarium is clean. Aquasonic Reefoam should not be used in aquariums without a protein skimmer.

Read more less

Certain water conditions restrict the ability of saltwater to foam and this in turn limits the activity of protein skimmers to extract waste. Many factors could be at fault, from the calcium hardness of the water, excretions of certain inhabitants or the oil from a fish food.   Aquasonic Reefoam overcomes these foam inhibitors without affecting essential water quality parameters and creates ideal conditions for protein skimmers to remove waste.   Directions for Use: 5ml per 40L of water. More or less may be required according to the water conditions present. Aquasonic Reefoam is not harmful to inhabitants, however it should be used on a need to use basis. If a protein skimmer produces clean foam waste after using Aquasonic Reefoam, then the aquarium is clean. Aquasonic Reefoam should not be used in aquariums without a protein skimmer.

Read more less

About Phosphates There are two types, Organic and Inorganic. The type we test for in aquaria is the Inorganic type, PO4. All living matter contains phosphorus but unfortunately organic phosphate can only be tested for in laboratories using sophisticated testing equipment.   The Effect of Phosphates In reef aquariums, levels of phosphates above 0.5ppm can adversely affect the growth of both hard and soft corals. It is recommended to keep phosphates at a maximum of 0.25ppm. In both fresh and saltwater aquariums phosphates above 0.5ppm can cause the growth of hair algae, blue green algae and other types of algae, including green water in ponds and lakes. A side affect of phosphate in saltwater aquarium, is the precipitation of calcium. There is no evidence that levels of phosphates affect the health of fish. High levels, say above 20ppm, may affect growth.   Where Phosphate Comes From The sources can be many and varied. Some tap water contains phosphates originating from agricultural run off or added by municipal water authorities to reduce levels of heavy metals. Some phosphates are a bi-product of fish waste or decaying algae. Some aquarium products e.g., pH adjusters, contain some phosphates. Most phosphate, however, comes from uneaten fish food due to over-feeding.   How to Reduce Phosphates The two considerations are: A) to reduce the level already present in the aquarium, use a Phosphate Sponge or similar. B) by changing some water in the aquarium. Take steps to stop the build up in the first place. If the tap water contains phosphates, filter before use with a Phosphate Sponge or use RO water. Do not over feed. Most important in controlling phosphates in any situation is to reduce the levels of waste or debris that may be present in the aquarium gravel or in silt behind rocks, coral etc. Change pre-filter or mechanical filters on a weekly or more frequent basis.   How to Determine Phosphate (as Inorganic Orthophosphate) in Salt or Fresh Water Rinse the clean test tube several times in the water to be tested. Fill the test tube to the 20ml mark with sample to be tested. Add 4 drops of Reagent A. If solution turns red, add Reagent B dropwise until colour disappears. If there is no colour evident after adding Reagent A go to step 4. Add 4 drops of Reagent B and mix. Add 2 drops of Reagent C and mix immediately. Wait one minute but no longer than five minutes after the addition of Reagent C to measure the colour intensity of the sample against the colour chart. Place the test tube on the white background of the colour chart, view vertically with the light behind you. The colour in the test tube is best viewed with natural light.   Note Be sure to cap all reagent bottles tightly. Reagent B is highly acidic and will cause skin irritation. If skin contact does occur wash immediately with cold water. After completion of the test, wash the test tube thoroughly as a previous test could influence the next one.

Read more less

Water in rainforest rivers is conditioned by leaf tannins, humic and organic acids. Some leaching of ground minerals also occurs. These conditions are natural disease inhibitors for fish. The water is soft, usually below 50ppm hardness and a pH between 5.5 and 6.5. Amazon Water Conditioner recreates these same conditions in an aquarium. The result is brighter and more active fish, with a high resistance to disease.   For aquarium use only. Keep out of reach of children.   Directions for Use: 2ml per 10L of aquarium water. Retreatment only necessary when changing water. For Aquarium use only. For soft water species. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

API® POND SIMPLY CLEAR bacterial cleaner is a natural bacterial-based pond clarifier that quickly clears cloudy water and keeps it clear. This triple action formula works fast to clear pond water, consume sludge, and break down algae, offering a long-term solution to murky water.   For initial dose at spring start-up and end of season dose, add 0.5 cup per 500 gallons of pond water twice a week for 2 weeks. For maintenance dose, add 4 tbsp. per 500 gallons of pond water every 2 weeks.

Read more less

API® POND STRESS COAT water conditioner acts as a unique water conditioner that replaces the natural slime coating on the skin of your pond fish when it has been damaged by handling, netting, or other forms of stress, and prevents the loss of internal fluids using electrolytes. This product contains Aloe Vera to help heal torn fins and skin wounds, protecting damaged tissue against disease-causing organisms. API POND STRESS COAT water conditioner instantly removes chlorine as it conditions tap water, and should be used when setting up a pond, adding new fish, or changing pond water.   When adding water to the pond: add 120 ml. for each 480 gallons of pond water. When introducing fish to the pond and to promote healing: double the dose.   What does API POND STRESS COAT™ water conditioner do? API POND STRESS COAT water conditioner removes chlorine and neutralizes chloramines and heavy metals. It also reduces stress in pond fish, and promotes the healing of wounds and regeneration of damaged tissue with Aloe Vera.   Is API POND STRESS COAT™ water conditioner a dechlorinator? Yes, API POND STRESS COAT water conditioner is a dechlorinator, and will make pond water safe for your fish.   Is API POND STRESS COAT™ water conditioner safe for all fish, invertebrates, and plants? Yes, API POND STRESS COAT water conditioner is safe for all wildlife.   Does API POND STRESS COAT™ water conditioner affect the biological filter or the pH of pond water? No, POND STRESS COAT water conditioner will not adversely affect the biological filter or pH levels.   Can I use API POND STRESS COAT™ water conditioner with other API products? Yes, you can use this product with all other API products.   I accidentally overdosed my fish with API POND STRESS COAT™ water conditioner. Should I worry? No, API POND STRESS COAT water conditioner will not harm your fish or plants.   How much API POND STRESS COAT™ water conditioner should I use? If you are using API POND STRESS COAT water conditioner as a dechlorinator to make tap water safe, you should dose enough for the amount of the new water you are adding to the aquarium. If you are using API POND STRESS COAT water conditioner to help fish recover from injury or disease, then you should dose enough for the amount of water in the whole pond.

Read more less

The API® POND 5-IN-1 TEST STRIPS provide accurate results for your pond’s water conditions using a highly precise colour chart for easy-to-read results.   Measured parameters include pH, Nitrite, Nitrate, Carbonate Hardness, and General Hardness. Snap-cap container keeps unused strips protected and dry, maintaining product stability and extending the shelf life of the product.   No separate test vial is required – simply dip a test strip directly into your pond for easy reading of your pond’s levels. Testing your water has never been so simple!

Read more less

API POND ALGAEFIX algae control effectively controls green water algae blooms, string or hair algae (Cladophora), and blanketweed (Oedogonium) in ponds containing live plants and fish. API POND ALGAEFIX algae control is fast-acting, controls algae growth, controls the formation of new algae, and helps resolve algae problems. Registered with the EPA, API POND ALGAEFIX algae control controls many types of algae in water gardens, ponds, and ornamental fountains containing live plants and fish.   To ensure accurate dosing, determine pond volume before use. Do not overdose. Add 1 teaspoon (5 ml) for each 50 gallons or 0.25 cup for each 600 gallons of pond or fountain water. Thoroughly mix into pond water by adding near the pump outflow, waterfall, or aeration device. It can be mixed in a bucket and dispersed evenly around the pond. Repeat dose every 3 days until algae is controlled. Once algae growth is under control, add one dose per week. Weekly doses will control algae growth and reduce pond maintenance. CAUTION: DO NOT use with freshwater crustaceans including shrimp, crabs, and lobsters.   Should API POND ALGAEFIX™ algae control and ECOFIX™ bacterial cleaner be used at the same time, or should the sludge remover be added after all the API ALGAEFIX algae control are completed? It is best to use API ALGAEFIX algae solution on its own until algae is under control.   How much API POND ALGAEFIX™ algae control is needed per gallon? To ensure accurate dosing of API POND ALGAEFIX algae control, determine pond volume before use. Add 1 teaspoon for each 50 gallons of pond/fountain water, or ¼ cup for each 600 gallons of pond or fountain water. Thoroughly mix into pond water by adding near the pump outflow, waterfall, or aeration device. API POND ALGAEFIX algae control may be mixed in a bucket of the pond/fountain water and dispersed evenly around the pond. Repeat dose every 3 days until algae is controlled. Be prepared to siphon out dead algae. Once algae growth is under control, add one dose per week. Weekly doses will control algae growth and reduce pond maintenance.   Can API POND ALGAEFIX™ algae control be used in concrete fountains? API ALGAEFIX algae control is designed for use in synthetic-lined ponds and fountains only.

Read more less