White spot disease is a common fish parasite that can be introduced via new fish, plants, etc. These parasites appear as distinct small white spots (pin head size) on the fish's body and fins. Unless prompt action is taken fatalities will occur.   Directions for Use: Not to be used on fish intended for human consumption. Ensure aquarium water is well aerated for the duration of the treatment. Activated carbon will remove this product from aquarium water resulting in ineffective treatment. Remove from filtration system for duration of treatment. This product contains a dye product which will stain if spilled.   Dosage rates: Use at the rate of 5mL per 20 litres of aquarium water. Harmful to corals. Do not overdose. Repeat treatment after 3 days if necessary. For tetra species, baby fish and scaleless fish (loaches etc.), use at a reduced rate of 5mL per 40 litres of aquarium water.   Storage: Store below 30C (Room Temperature). Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping with paper and putting in garbage.   Safety Instructions: Will irritate the eyes. May irritate the skin. Avoid contact with eyes and skin. If product on skin, wash immediately with soap and water. If product in eyes, wash it out immediately with water. Wash hands after use.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia (13 1126; New Zealand 0800 764 766). If swallowed, do not induce vomiting. Give a glass of water. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. Remove from contaminated area. Apply artificial respiration if not breathing. If in eyes, holde yes open. flood with water for at least 15minutes and see a doctor. WARNING - Avoid contact with eyes. Avoid contact with skin. Avoid breathing vapor.

Read more less

White spot disease is a common fish parasite that can be introduced via new fish, plants, etc. These parasites appear as distinct small white spots (pin head size) on the fish's body and fins. Unless prompt action is taken fatalities will occur.   Directions for Use: Not to be used on fish intended for human consumption. Ensure aquarium water is well aerated for the duration of the treatment. Activated carbon will remove this product from aquarium water resulting in ineffective treatment. Remove from filtration system for duration of treatment. This product contains a dye product which will stain if spilled.   Dosage rates: Use at the rate of 5mL per 20 litres of aquarium water. Harmful to corals. Do not overdose. Repeat treatment after 3 days if necessary. For tetra species, baby fish and scaleless fish (loaches etc.), use at a reduced rate of 5mL per 40 litres of aquarium water.   Storage: Store below 30C (Room Temperature). Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping with paper and putting in garbage.   Safety Instructions: Will irritate the eyes. May irritate the skin. Avoid contact with eyes and skin. If product on skin, wash immediately with soap and water. If product in eyes, wash it out immediately with water. Wash hands after use.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia (13 1126; New Zealand 0800 764 766). If swallowed, do not induce vomiting. Give a glass of water. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. Remove from contaminated area. Apply artificial respiration if not breathing. If in eyes, holde yes open. flood with water for at least 15minutes and see a doctor. WARNING - Avoid contact with eyes. Avoid contact with skin. Avoid breathing vapor.

Read more less

White spot disease is a common fish parasite that can be introduced via new fish, plants, etc. These parasites appear as distinct small white spots (pin head size) on the fish's body and fins. Unless prompt action is taken fatalities will occur.   Directions for Use: Not to be used on fish intended for human consumption. Ensure aquarium water is well aerated for the duration of the treatment. Activated carbon will remove this product from aquarium water resulting in ineffective treatment. Remove from filtration system for duration of treatment. This product contains a dye product which will stain if spilled.   Dosage rates: Use at the rate of 5mL per 20 litres of aquarium water. Harmful to corals. Do not overdose. Repeat treatment after 3 days if necessary. For tetra species, baby fish and scaleless fish (loaches etc.), use at a reduced rate of 5mL per 40 litres of aquarium water.   Storage: Store below 30C (Room Temperature). Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping with paper and putting in garbage.   Safety Instructions: Will irritate the eyes. May irritate the skin. Avoid contact with eyes and skin. If product on skin, wash immediately with soap and water. If product in eyes, wash it out immediately with water. Wash hands after use.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia (13 1126; New Zealand 0800 764 766). If swallowed, do not induce vomiting. Give a glass of water. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. Remove from contaminated area. Apply artificial respiration if not breathing. If in eyes, holde yes open. flood with water for at least 15minutes and see a doctor. WARNING - Avoid contact with eyes. Avoid contact with skin. Avoid breathing vapor.

Read more less

Aquasonic Bactonex assists in the prevention of bacterial, fungal and protozoal (Velvet, whitespot, chilodonella, Trichodina & Trichodinella) infections in fresh and salt water fish.   When to Use: When water is changed. When new fish are added and in quarantine aquariums. When fish show signs of listlessness or are off feed.   Directions for Use: Not to be used on fish intended for human consumption. Ensure aquarium water is well aerated during treatment. Do not use activated carbon in the filtration system during treatment as this will remove the product from the aquarium water. If sub-gravel filtration is being used, slow down the flow rates during treatment. This product contains a dye which will stain if spilled.   Dose Rate: Add 10mL per 40 litres of aquarium water. Repeat after 5 days if necessary. DO NOT OVERDOSE. If improvement does not occur, consult your veterinarian or aquarium dealer.TO GIVE NUMBER OF LITRES: To calculate approximate tank capacity multiply length x width x water level height (all in cms) and divide by 1000 for litres.   Active constituents: Each mL of solution contains: 1.66mg Aminacrine hydrochloride and 0.025mg Methylene blue.   Storage: Store below 30C (Room Temperature).   Disposal: Dispose of empty container by wrapping in paper and placing in garbage.   Remember: High standards of aquarium management must be maintained to prevent disease, as fish diseases are often management related. Consult your veterinarian or aquarium dealer for accurate diagnosis and advice.

Read more less

Aquasonic Bactonex assists in the prevention of bacterial, fungal and protozoal (Velvet, whitespot, chilodonella, Trichodina & Trichodinella) infections in fresh and salt water fish.   When to Use: When water is changed. When new fish are added and in quarantine aquariums. When fish show signs of listlessness or are off feed.   Directions for Use: Not to be used on fish intended for human consumption. Ensure aquarium water is well aerated during treatment. Do not use activated carbon in the filtration system during treatment as this will remove the product from the aquarium water. If sub-gravel filtration is being used, slow down the flow rates during treatment. This product contains a dye which will stain if spilled.   Dose Rate: Add 10mL per 40 litres of aquarium water. Repeat after 5 days if necessary. DO NOT OVERDOSE. If improvement does not occur, consult your veterinarian or aquarium dealer.TO GIVE NUMBER OF LITRES: To calculate approximate tank capacity multiply length x width x water level height (all in cms) and divide by 1000 for litres.   Active constituents: Each mL of solution contains: 1.66mg Aminacrine hydrochloride and 0.025mg Methylene blue.   Storage: Store below 30C (Room Temperature).   Disposal: Dispose of empty container by wrapping in paper and placing in garbage.   Remember: High standards of aquarium management must be maintained to prevent disease, as fish diseases are often management related. Consult your veterinarian or aquarium dealer for accurate diagnosis and advice.

Read more less

Magna Clear will clear water in aquariums when water is cloudy or where gravel has dirtied the water. Ideal for new aquariums. Excellent for fish bowls. Magna Clear will assist filters in your aquarium to work more efficiently and also helps clear aquariums with insufficient filtration and bowls with no filtration. Magna Clear settles and collects suspended organic matter, which can then be easily siphoned off leaving your aquarium clear.   Directions for Use: 1ml per 20ml, (3 drops per 4L) for clearing cloudy or new aquariums.1ml per 40ml for improved filtration or to settle suspended organic matter.   Important: Dilute calculated dosage in a small quantity of water before dispersal into the aquarium. Airstones and filtration will help the dispersion. Only gentle agitation is required. Repeat if necessary after 24 hours. Do not use more than twice in 14 days.

Read more less

Water changes can be very tough on aquarium fish, often resulting in disease or even fatality. Protech has been formulated to effectively assist fish with recovery after a water change, transport or handling. Protech replaces slime coating and makes fish feel well by providing a powerful vitamin mix including: B1, B2, B6, B12, E, and A. This enables the fish to fight off disease and start feeding again quickly. Use during and after transport, after a water change, after any handling of fish or simply as a vitamin supplement. Fungal inhibitors have also been added to help guard against infections.   Directions for Use: 1ml per 20L for general use. For fish in a poor state use treatments as high as 1ml per 5L to assist in faster recovery. For transport use general dose rates. 1ml - approx. 15 drops. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Most water supplies such as tap water, are chlorinated. Chlorine can be extremely harmful to aquarium fish. Water Purifier is the most important supplement for the aquarist. Water Purifier will effectively neutralise chlorine and chloramines in tap water immediately, making water safe for aquarium use. Following the use of Aquasonic Water Purifier, use Aquasonic Water Conditioning Salts to create an ideal habitat for fish and aquatic plants. For trouble free saltwater, use Aquasonic Ocean Nature Sea Salt, adding the Water Purifier before mixing salt with water.   Directions for Use: 1ml per 10ml of water.Add to new aquarium water or any water to be added to the aquarium. Pre-mix Water Purifier with tap water before adding to aquariums containing fish. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

In all aquarium systems, biological activity develops in your filter, and on the surface of gravels and decorations etc. These bacteria are essential to achieve a balance in your aquarium and different types of bacteria need to be present in the right proportions to break down waste and deal with ammonia, nitrite and nitrate, which can all be harmful to your fish. Every time you change or add something in your tank, or you clean it, you potentially upset the balance because you are effectively removing some of this bacteria.   Nitrate Nitrate ions are produced as a result of biological action occurring mainly in your aquarium filter system. It is the residue of a chain reaction by aerobic bacteria, breaking down fish waste. Nitrate accumulates in an aquarium in proportion to the stock load waste and is a good indicator of general water quality.   Permissible Nitrate Levels As nitrate levels increase, water quality decreases. The quantity of permissible nitrate varies with the particular aquatic life being cultured. a) For marine systems culturing fish, acceptable levels are 20ppm to 40ppm. Many species of marine fish will accept higher levels of 80ppm to 100ppm without apparent effect on their health. But it is recommended that when levels climb above 40ppm steps should be taken to lower the nitrate to avoid stress. b) For reef systems culturing invertebrates, much lower levels of nitrate are acceptable. A level of 5ppm or less is optimum. Again, many invertebrates will accept higher levels but once these levels climb above 20ppm many of the more sensitive invertebrates will be irreparably damaged. It has been shown that small quantities of around 5ppm of nitrate are of assistance in culturing marine plants. Nitrate tests on reef systems should occur weekly and levels should be kept below 10ppm. c) Freshwater fish. Tolerance to nitrate with freshwater fish is higher than saltwater species. Some delicate species will tolerate around 50ppm, but some species will tolerate far higher levels. It is recommended that as nitrate levels approach 50ppm steps should be taken to reduce the level.   Lowering Nitrate The easiest method to lower nitrate is to change water. Regular water changes should ensure that the nitrate levels stay within acceptable limits. Recommended minimum water change requirements are 25% per month. If water changes do not keep the nitrate at acceptable levels, then perhaps the number of fish in the tank is too great for your aquarium system, so reduce the number of fish. Denitrification filters can lower nitrate successfully, but this must be closely monitored to avoid dangerous gases that can harm aquarium inhabitants. Marine plants and algae can use some nitrate as nutrients and are a definite advantage in the control of nitrate.   To Break The Ammonia - Nitrite - Nitrate Cycle: Perform a water change Remove anything that can cause ammonia to form (e.g., dead organic matter or excess fish waste) from amongst the substrate (e.g., gravel cleaner) Use Aquasonic AMMO-GONE to neutralise ammonia in the system. The manual addition of live strains of nitrifying bacteria can also aid in kick starting the biological activity in the filter system.   Directions for Use to Determine the Nitrate Level in Water: Rinse empty test tube and cap several times in the water to be tested. Fill the test tube to the 5ml mark and add 7 drops of Reagent A. Swirl to mix. Add 1 level scoop of Reagent B and gently swirl the solution for a few seconds. Ensure that Reagent B is kept dry at all times. Add 7 drops of Reagent C, mix for a few seconds and let the solution stand for 3 minutes after which time full colour development will have occurred. Place the test tube on the white background of the colour chart, view vertically down the tube. The colour in the test tube is best viewed with natural light behind you. On completion of the test, rinse clean the test tube. Ensure Reagent B remains dry and that the cap is firmly in place.   Note: If the nitrate level in the test solution is more than 80ppm (use your colour chart to determine) then you can still determine the level by diluting the sample with nitrate free water (preferably distilled water). For example, to prepare a test that will measure up to 160ppm nitrate, mix a sample with half water to be tested and half water that is nitrate free. Then multiply the results of the test by 2. To read up to 320ppm nitrate, use 25% water to be tested and 75% nitrate free water, then multiply the result by 4. *Colour chart to be used as a base guide only. Colours may vary according to various water conditions.

Read more less

The Aquasonic Complete Freshwater 6 in 1 Test Kit is all you need to ensure you have the perfect water conditions in your aquarium.   This 6 in 1 Test Kit includes: Nitrate Test Kit Nitrite Test Kit Ammonia Test Kit Carbonate Harness Test Kit Fresh pH Compele Test Kit (includes pH Down and pH Up) General Hardness Test Kit   Each test kit includes an information card, colour chart, and a clear measuring vial.   Fast, accurate and easy to use!

Read more less

The African Rift Lakes have a unique water chemistry and African Cichlids thrive under these special conditions. Aquasonic Riftlake Conditioning Salts have been formulated to re-create this same water chemistry in your aquarium, creating natural conditions. It contains the correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors, to promote health and wellbeing.   Use Riftlake Water Conditioning Salts with new aquarium water, when starting up an aquarium or doing a water change. Do not use in water used to top up aquarium evaporation. Riftlake Water Conditioning Salts contains 11 natural salts and will raise the General Hardness by 300ppm and Salinity by 80ppm. A pH of 7.00 will rise to approx. 8.00.   Directions for Use: Add 5g (1 level teaspoon) per 7L of water. Re-seal container when not in use. Do not redose without a water change. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Water in rainforest rivers is conditioned by leaf tannins, humic and organic acids. Some leaching of ground minerals also occurs. These conditions are natural disease inhibitors for fish. The water is soft, usually below 50ppm hardness and a pH between 5.5 and 6.5. Amazon Water Conditioner recreates these same conditions in an aquarium. The result is brighter and more active fish, with a high resistance to disease.   For aquarium use only. Keep out of reach of children.   Directions for Use: 2ml per 10L of aquarium water. Retreatment only necessary when changing water. For Aquarium use only. For soft water species. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less