Essential for all marine life. Aquasonic Calcium-Sup is used to raise the calcium level of a reef system, quickly and safely. One treatment raises the level by approx. 50ppm. Natural seawater contains calcium levels of 380ppm but this level however may be depleted in closed circuit aquaria. Calcium levels of around 400 to 450ppm encourage the growth of hard corals and coralline algae. Molluscs, crustaceans and some marine plants will also benefit.   Directions for Use: 5ml per 20L raises the calcium by approx. 50ppm. Before re-treatment test levels with an Aquasonic Calcium Test Kit. Treatment may be applied in smaller doses over several weeks if required. It is recommended that a water change of 25% or more per month be made. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Essential for all marine life. Aquasonic Calcium-Sup is used to raise the calcium level of a reef system, quickly and safely. One treatment raises the level by approx. 50ppm. Natural seawater contains calcium levels of 380ppm but this level however may be depleted in closed circuit aquaria. Calcium levels of around 400 to 450ppm encourage the growth of hard corals and coralline algae. Molluscs, crustaceans and some marine plants will also benefit.   Directions for Use: 5ml per 20L raises the calcium by approx. 50ppm. Before re-treatment test levels with an Aquasonic Calcium Test Kit. Treatment may be applied in smaller doses over several weeks if required. It is recommended that a water change of 25% or more per month be made. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Essential for all marine life. Aquasonic Calcium-Sup is used to raise the calcium level of a reef system, quickly and safely. One treatment raises the level by approx. 50ppm. Natural seawater contains calcium levels of 380ppm but this level however may be depleted in closed circuit aquaria. Calcium levels of around 400 to 450ppm encourage the growth of hard corals and coralline algae. Molluscs, crustaceans and some marine plants will also benefit.   Directions for Use: 5ml per 20L raises the calcium by approx. 50ppm. Before re-treatment test levels with an Aquasonic Calcium Test Kit. Treatment may be applied in smaller doses over several weeks if required. It is recommended that a water change of 25% or more per month be made. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

What is Carbonate Hardness? The extent of carbonate and bicarbonate contained in a sample of water is the Carbonate Hardness value of that sample. Carbonate Hardness affects all aquaria, both salt and fresh. It is called many names, according to the jargon of an industry or country of origin of the test kit, eg CARBONATE HARDNESS = ALKALINITY = kH (German) = ACID BINDING CAPACITY.   Stability of pH The Carbonate Hardness of water is an important measurement, because the level of Carbonate Hardness is the basis for the value of the pH in a given sample of water. A strong Carbonate Hardness reserve in water can mean a very stable pH and the bonus of an alternative supply of carbon dioxide for plants and algae if supply runs short in an aquarium. This applies equally for marine or freshwater aquaria.   Depletion of the Carbonate Hardness Reserve Acids which form as a result of the breakdown of waste products by bacteria (via biological filtration) is the most common way the carbonate hardness reserve is depleted. In aquariums with little or no carbonate hardness the pH is very unstable and can drop very quickly to acid.   Raising Carbonate Harness Aquasonic Carbonate Hardness Generator Powder is recommended for fresh or salt water applications. 5g will raise the Carbonate Hardness of 100L of water by 20ppm.   Directions for Use: The test kit has a dual range, which measures in steps of 10ppm or 20ppm (ppm = parts per million)   To Test in 10ppm: Rinse the clean test tube several times in the water to be tested. Fill the test tube accurately to the 10mL mark. Add 2 drops REAGENT 1 and swirl to mix. A blue colour forms. Now add REAGENT 2 a drop at a time and swirl to mix. Keep count of the drops. As the end point is reached the test tube colour will change to green. Add 1 more drop to complete the change to yellow. Multiply the number of drops by 10 for the reading in ppm.   To Test in 20ppm: Rinse the clean test tube several times in the water to be tested. Fill the test tube accurately to the 5mL mark. Add 1 drop of REAGENT 1 and swirl to mix. A blue colour forms. Add REAGENT 2 a drop at a time and swirl to mix. Keep count of the drops. When the colour changes to yellow the end point is reached. Multiply the number of drops by 20 for a reading in ppm.   Note: Place the test tube on the white background of the colour chart with the light behind you. The colour in the test tube is best viewed with the natural light.

Read more less

The Aquasonic Complete Freshwater 6 in 1 Test Kit is all you need to ensure you have the perfect water conditions in your aquarium.   This 6 in 1 Test Kit includes: Nitrate Test Kit Nitrite Test Kit Ammonia Test Kit Carbonate Harness Test Kit Fresh pH Compele Test Kit (includes pH Down and pH Up) General Hardness Test Kit   Each test kit includes an information card, colour chart, and a clear measuring vial.   Fast, accurate and easy to use!

Read more less

Products For pH Adjustment pH Down (contained in this kit) Use 5g (1 teaspoon) per 70L of water. Wait 12 hours and test pH before redosing. Re-dose at 12 hour intervals until desired pH is reached. pH Up (contained in this kit) Use 5g (1 teaspoon) per 70L of water. Wait 12 hours and test pH before  re-dosing. Re-dose at 12 hour intervals until desired pH is reached.   Directions for Use Rinse a clean test tube and cap several times in water to be tested. Fill to line (12.5ml) with water to be tested. Add 3 drops of Indicator solution Place the test tube on the white background of the colour chart, view vertically (down inside the test tube) with the light behind you. The colour in the test tube is best viewed with natural light. View immediately. Note: Adjust pH slowly.

Read more less