Fish Supplies

Zeo-Carb is a premium blend of Fluval Carbon and Ammonia Remover that eliminate water impurities, odors and discoloration, while simultaneously removing toxic ammonia.

Read more less

API® MARINE STRESS ZYME bacterial cleaner contains millions of live bacteria that consume sludge and organic debris, reducing aquarium maintenance by keeping live rock, coral, sand, gravel, and aquarium glass clean. May be used weekly to reduce aquarium maintenance and maintain a strong biological filter. Making API MARINE STRESS ZYME bacterial cleaner a part of regular aquarium care ensures an active biological filter, a cleaner aquarium, healthier fish, and good water quality.

Read more less

The African Rift Lakes have a unique water chemistry and African Cichlids thrive under these special conditions. Aquasonic Riftlake Conditioning Salts have been formulated to re-create this same water chemistry in your aquarium, creating natural conditions. It contains the correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors, to promote health and wellbeing.   Use Riftlake Water Conditioning Salts with new aquarium water, when starting up an aquarium or doing a water change. Do not use in water used to top up aquarium evaporation. Riftlake Water Conditioning Salts contains 11 natural salts and will raise the General Hardness by 300ppm and Salinity by 80ppm. A pH of 7.00 will rise to approx. 8.00.   Directions for Use: Add 5g (1 level teaspoon) per 7L of water. Re-seal container when not in use. Do not redose without a water change. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

Ocean Free - Smart 1000 Bio Foam is replacement foam suitable for the Ocean Free - Smart 1000 Internal Filter

Read more less

Ocean Free - Smart 1000 Carbon Cartridge is replacement Carbon/Zeolite suitable for the Ocean Free - Smart 1000 Internal Filter

Read more less

Water in rainforest rivers is conditioned by leaf tannins, humic and organic acids. Some leaching of ground minerals also occurs. These conditions are natural disease inhibitors for fish. The water is soft, usually below 50ppm hardness and a pH between 5.5 and 6.5. Amazon Water Conditioner recreates these same conditions in an aquarium. The result is brighter and more active fish, with a high resistance to disease.   For aquarium use only. Keep out of reach of children.   Directions for Use: 2ml per 10L of aquarium water. Retreatment only necessary when changing water. For Aquarium use only. For soft water species. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Water in rainforest rivers is conditioned by leaf tannins, humic and organic acids. Some leaching of ground minerals also occurs. These conditions are natural disease inhibitors for fish. The water is soft, usually below 50ppm hardness and a pH between 5.5 and 6.5. Amazon Water Conditioner recreates these same conditions in an aquarium. The result is brighter and more active fish, with a high resistance to disease.   For aquarium use only. Keep out of reach of children.   Directions for Use: 2ml per 10L of aquarium water. Retreatment only necessary when changing water. For Aquarium use only. For soft water species. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Tropical Water Conditioning Salts have been formulated to re-create natural conditions in your aquarium. It contains the correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors, to promote health and wellbeing.   Use Tropical Water Conditioning Salts with new aquarium water, when starting up or doing a water change. It will raise General Hardness by approx. 80ppm and Salinity (NaCl) by 130ppm. Further addition of salt (NaCl) is not recommended.   Directions for Use: Add 5g (1 level teaspoon) per 15L of water. Re-seal container when not in use. Do not redose without a water change. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

The African Rift Lakes have a unique water chemistry and African Cichlids thrive under these special conditions. Aquasonic Riftlake Conditioning Salts have been formulated to re-create this same water chemistry in your aquarium, creating natural conditions. It contains the correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors, to promote health and wellbeing.   Use Riftlake Water Conditioning Salts with new aquarium water, when starting up an aquarium or doing a water change. Do not use in water used to top up aquarium evaporation. Riftlake Water Conditioning Salts contains 11 natural salts and will raise the General Hardness by 300ppm and Salinity by 80ppm. A pH of 7.00 will rise to approx. 8.00.   Directions for Use: Add 5g (1 level teaspoon) per 7L of water. Re-seal container when not in use. Do not redose without a water change. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Normal pH The pH of water in the ocean is around 8.1. This is also the recommended pH of a marine aquarium, with levels slightly above or below this value considered acceptable. This happens as a result of the carbonate hardness value of sea water, which is about 125ppm. However, certain events such as biological filtration of a marine aquarium, tend to reduce the carbonate hardness value and therefore lower the pH. Also certain influences, such as carbon dioxide, can affect the reading of pH value.   Biological Filtration The assimilation of waste by bacteria in the filter of a marine aquarium is an acidifying process and in time will reduce the carbonate hardness value of the water. As this occurs, the pH value will fall. Carbonate hardness levels can be maintained with Aquasonic Carbonate Hardness Generator Powder. At a pH of 8.1 the carbonate hardness value should be 125ppm. If the carbonate hardness value of a marine aquarium is correct, yet pH values are not, the influence of carbon dioxide should be considered.   The Effects of CO2 For pH to read correctly, carbon dioxide must be in equilibrium with the atmosphere. Carbon dioxide is produced by fish, plants, corals and bacteria assimilating waste in the biological filter in the aquarium. Some trickle (mini-reef) filters can expel carbon dioxide so efficiently that the quantity of carbon dioxide is less than the atmosphere, so pH reads higher than it really is. Likewise, in an aquarium with substrate filtration, carbon dioxide has some difficulty escaping as it is produced by the biological filter and other life. Under these conditions, carbonic acid may be formed and pH will read lower.   Using pH to Advantage During the development of bacteria in a biological filter, ammonia and nitrate conditions ensure. Both are deadly to marine fish. The toxicity of ammonia and nitrite, however, is in direct relation to the pH value of the water in the system. By lowering the pH, the toxicity of these deadly conditions is minimised. To lessen the toxicity of nitrite, lower the pH to 7.5.

Read more less