Aquasonic Frystarter has been specially formulated to feed newly hatched fry. It contains shrimp, fish, egg, vitamins and minerals, and has a variety of tiny food particles suitable for both livebearer and egglayer fry. When feeding, Frystarter stays in suspension longer, giving the fry a constant supply of food. Filtration should be maintained as an adequate safe guard against the risk of over feeding.    Directions for Use: Feed the newly hatched fry 3-4 drops, 3 times daily dependant on aquarium size and fry numbers. Careful observation will enable you to achieve the correct dosage for your particular species of fish. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Frystarter has been specially formulated to feed newly hatched fry. It contains shrimp, fish, egg, vitamins and minerals, and has a variety of tiny food particles suitable for both livebearer and egglayer fry. When feeding, Frystarter stays in suspension longer, giving the fry a constant supply of food. Filtration should be maintained as an adequate safe guard against the risk of over feeding.    Directions for Use: Feed the newly hatched fry 3-4 drops, 3 times daily dependant on aquarium size and fry numbers. Careful observation will enable you to achieve the correct dosage for your particular species of fish. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Frystarter has been specially formulated to feed newly hatched fry. It contains shrimp, fish, egg, vitamins and minerals, and has a variety of tiny food particles suitable for both livebearer and egglayer fry. When feeding, Frystarter stays in suspension longer, giving the fry a constant supply of food. Filtration should be maintained as an adequate safe guard against the risk of over feeding.    Directions for Use: Feed the newly hatched fry 3-4 drops, 3 times daily dependant on aquarium size and fry numbers. Careful observation will enable you to achieve the correct dosage for your particular species of fish. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Paragone tablets aid in the control of most external fish parasites including Fish lice (argulus spp), Gill Flukes (Ergasilus spp) and Anchor worms (Lernea spp).   Directions for Use: Not to be used on fish intended for human consumption. Fish rubbing and scratching on objects is indicative of parasitic infestations. Para-Gone tablets aid in the control of most external fish parasites including: Fish lice (Argulus spp), Skin & Gill Flakes (Ergasilus spp), and Anchor Worms (Lernaea spp) in fresh and saltwater aquariums. Does not aid in the treatment of bacterial and viral infections.   Do Not Overdose: Do not treat marine invertebrates (shellfish & anemones). Remove from aquaria and wait 5 days after last treatment before returning to aquaria. *Para-Gone treatment may adversely affect species of Plecostomus and Bristle Nose type catfish, as well as Metynnis (Silver Dollar type fish).   Dosage and Administration: Use 1 tablet per 40 litres of aquarium water. For Fish Lice (Argulus spp) and Gill Flukes (Ergasilus spp) repeat the treatment after 7 days until all signs of parasitic infection are eradicated. During treatment it is advisable to keep the temperature of the aquarium water at 25C and to maintain the pH between 6 and 7. For Anchor Worms (Lernea spp) foloow the above treatment regime but repeat treatments at 5 day intervals until all adults are killed. A colder water 20C temperature allows treatment to be repeated at 12 day intervals.   Remember: High standards of aquarium management must be maintained to prevent disease, as fish diseases are often management related. Consult your veterinarian or aquarium dealer for accurate diagnosis and advice.To calculate approximate tank capacity multiply length x width x water level height (in cm) and divide by 1,000 for litres.Pre-dissolve tablets in a disposable cup before addition to aquarium water. Refer to disposal statemetn for cup after use. NOTE: A small residue of insoluble matter will be eveident after dissolving tablets. This residue is harmless to fish.

Read more less

Highly nutritional fish feed with natural colour enhancers and multi-vitamins. Contains spirulina for protein and yeast extract for digestive support. Ideal for core and supplementary diets for goldfish.

Read more less

TANKMAID - Filter Wool (500g) is a critical component of both freshwater and marine filtration systems.  Filter wool removes physical and chemical waste products from aquariums, providing simple maintenance.

Read more less

API® POND SIMPLY CLEAR bacterial cleaner is a natural bacterial-based pond clarifier that quickly clears cloudy water and keeps it clear. This triple action formula works fast to clear pond water, consume sludge, and break down algae, offering a long-term solution to murky water.   For initial dose at spring start-up and end of season dose, add 0.5 cup per 500 gallons of pond water twice a week for 2 weeks. For maintenance dose, add 4 tbsp. per 500 gallons of pond water every 2 weeks.

Read more less

API® POND STRESS COAT water conditioner acts as a unique water conditioner that replaces the natural slime coating on the skin of your pond fish when it has been damaged by handling, netting, or other forms of stress, and prevents the loss of internal fluids using electrolytes. This product contains Aloe Vera to help heal torn fins and skin wounds, protecting damaged tissue against disease-causing organisms. API POND STRESS COAT water conditioner instantly removes chlorine as it conditions tap water, and should be used when setting up a pond, adding new fish, or changing pond water.   When adding water to the pond: add 120 ml. for each 480 gallons of pond water. When introducing fish to the pond and to promote healing: double the dose.   What does API POND STRESS COAT™ water conditioner do? API POND STRESS COAT water conditioner removes chlorine and neutralizes chloramines and heavy metals. It also reduces stress in pond fish, and promotes the healing of wounds and regeneration of damaged tissue with Aloe Vera.   Is API POND STRESS COAT™ water conditioner a dechlorinator? Yes, API POND STRESS COAT water conditioner is a dechlorinator, and will make pond water safe for your fish.   Is API POND STRESS COAT™ water conditioner safe for all fish, invertebrates, and plants? Yes, API POND STRESS COAT water conditioner is safe for all wildlife.   Does API POND STRESS COAT™ water conditioner affect the biological filter or the pH of pond water? No, POND STRESS COAT water conditioner will not adversely affect the biological filter or pH levels.   Can I use API POND STRESS COAT™ water conditioner with other API products? Yes, you can use this product with all other API products.   I accidentally overdosed my fish with API POND STRESS COAT™ water conditioner. Should I worry? No, API POND STRESS COAT water conditioner will not harm your fish or plants.   How much API POND STRESS COAT™ water conditioner should I use? If you are using API POND STRESS COAT water conditioner as a dechlorinator to make tap water safe, you should dose enough for the amount of the new water you are adding to the aquarium. If you are using API POND STRESS COAT water conditioner to help fish recover from injury or disease, then you should dose enough for the amount of water in the whole pond.

Read more less

The API® POND 5-IN-1 TEST STRIPS provide accurate results for your pond’s water conditions using a highly precise colour chart for easy-to-read results.   Measured parameters include pH, Nitrite, Nitrate, Carbonate Hardness, and General Hardness. Snap-cap container keeps unused strips protected and dry, maintaining product stability and extending the shelf life of the product.   No separate test vial is required – simply dip a test strip directly into your pond for easy reading of your pond’s levels. Testing your water has never been so simple!

Read more less

API POND ALGAEFIX algae control effectively controls green water algae blooms, string or hair algae (Cladophora), and blanketweed (Oedogonium) in ponds containing live plants and fish. API POND ALGAEFIX algae control is fast-acting, controls algae growth, controls the formation of new algae, and helps resolve algae problems. Registered with the EPA, API POND ALGAEFIX algae control controls many types of algae in water gardens, ponds, and ornamental fountains containing live plants and fish.   To ensure accurate dosing, determine pond volume before use. Do not overdose. Add 1 teaspoon (5 ml) for each 50 gallons or 0.25 cup for each 600 gallons of pond or fountain water. Thoroughly mix into pond water by adding near the pump outflow, waterfall, or aeration device. It can be mixed in a bucket and dispersed evenly around the pond. Repeat dose every 3 days until algae is controlled. Once algae growth is under control, add one dose per week. Weekly doses will control algae growth and reduce pond maintenance. CAUTION: DO NOT use with freshwater crustaceans including shrimp, crabs, and lobsters.   Should API POND ALGAEFIX™ algae control and ECOFIX™ bacterial cleaner be used at the same time, or should the sludge remover be added after all the API ALGAEFIX algae control are completed? It is best to use API ALGAEFIX algae solution on its own until algae is under control.   How much API POND ALGAEFIX™ algae control is needed per gallon? To ensure accurate dosing of API POND ALGAEFIX algae control, determine pond volume before use. Add 1 teaspoon for each 50 gallons of pond/fountain water, or ¼ cup for each 600 gallons of pond or fountain water. Thoroughly mix into pond water by adding near the pump outflow, waterfall, or aeration device. API POND ALGAEFIX algae control may be mixed in a bucket of the pond/fountain water and dispersed evenly around the pond. Repeat dose every 3 days until algae is controlled. Be prepared to siphon out dead algae. Once algae growth is under control, add one dose per week. Weekly doses will control algae growth and reduce pond maintenance.   Can API POND ALGAEFIX™ algae control be used in concrete fountains? API ALGAEFIX algae control is designed for use in synthetic-lined ponds and fountains only.

Read more less

API POND ALGAEFIX algae control effectively controls green water algae blooms, string or hair algae (Cladophora), and blanketweed (Oedogonium) in ponds containing live plants and fish. API POND ALGAEFIX algae control is fast-acting, controls algae growth, controls the formation of new algae, and helps resolve algae problems. Registered with the EPA, API POND ALGAEFIX algae control controls many types of algae in water gardens, ponds, and ornamental fountains containing live plants and fish.   Instructions: To ensure accurate dosing, determine pond volume before use. Do not overdose. Add 1 teaspoon (5 ml) for each 50 gallons or 0.25 cup for each 600 gallons of pond or fountain water. Thoroughly mix into pond water by adding near the pump outflow, waterfall, or aeration device. It can be mixed in a bucket and dispersed evenly around the pond. Repeat dose every 3 days until algae is controlled. Once algae growth is under control, add one dose per week. Weekly doses will control algae growth and reduce pond maintenance. CAUTION: DO NOT use with freshwater crustaceans including shrimp, crabs, and lobsters. FAQs: Should API POND ALGAEFIX™ algae control and ECOFIX™ bacterial cleaner be used at the same time, or should the sludge remover be added after all the API ALGAEFIX algae control are completed? It is best to use API ALGAEFIX algae solution on its own until algae is under control.   How much API POND ALGAEFIX™ algae control is needed per gallon? To ensure accurate dosing of API POND ALGAEFIX algae control, determine pond volume before use. Add 1 teaspoon for each 50 gallons of pond/fountain water, or ¼ cup for each 600 gallons of pond or fountain water. Thoroughly mix into pond water by adding near the pump outflow, waterfall, or aeration device. API POND ALGAEFIX algae control may be mixed in a bucket of the pond/fountain water and dispersed evenly around the pond. Repeat dose every 3 days until algae is controlled. Be prepared to siphon out dead algae. Once algae growth is under control, add one dose per week. Weekly doses will control algae growth and reduce pond maintenance.   Can API POND ALGAEFIX™ algae control be used in concrete fountains? API ALGAEFIX algae control is designed for use in synthetic-lined ponds and fountains only.

Read more less

API pH Proper 7.5 Powder Jar automatically sets and stabilizes the pH level in freshwater aquariums to 7.5 which is perfect for Goldfish, Guppies, Barbs, Swordtails, Platies and Mollies. It also removes toxic compounds from tap water such as chlorine, neutralises chloramines, detoxifies heavy metals, and adds electrolytes, making tap water safe for fish. Use this aquarium treatment when setting up a new aquarium, adjusting pH, or changing water. pH in an aquarium can fluctuate due to fish waste, uneaten food and addition of tap water. It is recommended to test water for pH weekly.   pH is the measure of acidity of water, on a scale ranging from 0 to 14. A pH of 0 is the most acidic, while a pH of 14 is the most alkaline. Water with a pH of 7.0 is considered ""neutral"". Different geographies have different tap water conditions with different pH levels, while fish require a specific pH level to thrive.   API Aquarium Treatment Supplies are designed to work in conjunction with each other to provide best results to control algae, promote healthy bacterial growth and help control and cure fish diseases and conditions such as ich and fin rot. They work to provide a safe, hospitable environment for fish such as tropical community fish, cichlids, goldfish and more. With API, you can spend more time admiring your fish, and less time scrubbing your tank. Make sure to use all products as directed in order to ensure the best results.

Read more less