Aquasonic pH-Up is for reducing acidity. Made from high grade chemicals and works instantly. Treatment: Used to quickly raise pH Result: Will raise pH. Varies according to initial pH. Dose Rate: 1 teaspoon per 70 litres in a 12hr period. Use until desired pH is reached.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

The Carbonate Hardness (kH) or also referred to as alkalinity of water is the basis for pH values. The stability of pH can be ensured by raising carbonate hardness levels without effect on general hardness.Acids produced in closed circuit aquaria continuously reduce the carbonate hardness levels.   Carbonate Hardness Generator is a special blend of pH buffers that provide a sustained kH level for longer than if using just sodium bicarbonate. Prior raising of carbonate levels will avert drastic falls in pH resultant from these acids, acting to maintain a more stable pH.   Directions for Use: 4g (approx. 1 teaspoon) per 100L of water or 40g per 1000L of water raises carbonate hardness levels by 20ppm. Caution pH levels may rise. It is not recommended to raise carbonate hardness values by more than 20ppm per day.To calculate approximate aquarium capacity: Multiply the length x width x height (in cm) and divide by 1,000 for litres.

Read more less

The African Rift Lakes have a unique water chemistry and African Cichlids thrive under these special conditions. Aquasonic Riftlake Conditioning Salts have been formulated to re-create this same water chemistry in your aquarium, creating natural conditions. It contains the correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors, to promote health and wellbeing.   Use Riftlake Water Conditioning Salts with new aquarium water, when starting up an aquarium or doing a water change. Do not use in water used to top up aquarium evaporation. Riftlake Water Conditioning Salts contains 11 natural salts and will raise the General Hardness by 300ppm and Salinity by 80ppm. A pH of 7.00 will rise to approx. 8.00.   Directions for Use: Add 5g (1 level teaspoon) per 7L of water. Re-seal container when not in use. Do not redose without a water change. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Activated Carbon removes dissolved organic impurities, water discolouration, odour and heavy metals. This product is a highly activated carbon, capable of holding up to 30% of its own weight in chemical impurities and organic contaminants. Aquasonic Activated Carbon is more efficient and will outlast conventional charcoal/carbons. Smaller quantities of Aquasonic Carbon may be used.   For aquarium use only. Keep out of reach of children.   Directions for use: Rinse before use. Fill the area between filter material in the filter. Works optimally with a filter (nylon) bag. Reseal any unused activated carbon. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Bio-Tet tablets are a broad spectrum antibiotic that treats disease in ornamental fresh & salt water aquarium fish caused by tetracycline sensitive bacteria.   Directions for Use: Do not swallow. Do not use on fish intended for human consumption. Remove activated carbon or other absorbent materials from filtration system and slow flow rate of sub-gravel filtration for the duration of the treatment.Use of an isolated treatment tank as a hospital tank for affected fish is recommended and ensure the water is as similar as possible to the main aquarium (pH, temperature, salinity, etc.) Aerate vigorously during treatment.   Dosage Rate: Use 1 tablet per 20 litres of aquarium water. If conditions do not improve, consult your veterinarian or aquarium dealer. Replace aquarium water after successful treatment. To calculate approximate tank capacity multiply length x width x water level height (in cm) and divide by 1,000 for litres.   CAUTION. Keep out of reach of children. For animal treatment only.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131126, New Zealand 0800 764 766 or a doctor (at once). If swallowed, and more than 15 minutes from a hospital, induce vomiting preferably using Ipecac Syrup APF.   Storage: Store below 30C (Room Temperature). Protect from light. Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping in paper and placing in garbage.

Read more less

Aquasonic Bio-Tet tablets are a broad spectrum antibiotic that treats disease in ornamental fresh & salt water aquarium fish caused by tetracycline sensitive bacteria.   Directions for Use: Do not swallow. Do not use on fish intended for human consumption.Remove activated carbon or other absorbent materials from filtration system and slow flow rate of sub-gravel filtration for the duration of the treatment.Use of an isolated treatment tank as a hospital tank for affected fish is recommended and ensure the water is as similar as possible to the main aquarium (pH, temperature, salinity, etc.) Aerate vigorously during treatment.   Dosage Rate: Use 1 tablet per 20 litres of aquarium water. If conditions do not improve, consult your veterinarian or aquarium dealer. Replace aquarium water after successful treatment. To calculate approximate tank capacity multiply length x width x water level height (in cm) and divide by 1,000 for litres.   CAUTION. Keep out of reach of children. For animal treatment only.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131126, New Zealand 0800 764 766 or a doctor (at once). If swallowed, and more than 15 minutes from a hospital, induce vomiting preferably using Ipecac Syrup APF.   Storage: Store below 30C (Room Temperature). Protect from light. Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping in paper and placing in garbage.

Read more less

Fungal diseases are common in freshwater fishes and are recognised by white or grey threads on the skin or fins which may thicken until they resemble tufts of cotton wool (pin head size) on the fished body and fins. Unless prompt action is taken fatalities will occur.   Directions for Use: Do not use on fish intended for human consumption. A partial water change (25% capacity) is recommended before commencing treatment. Ensure aquarium water is well aerated and remove activated carbon from filtration system for the duration of treatment. Activated carbon will remove this product from the aquarium water resulting in ineffective. This product contains a dye product which will stain if spilled.   Dose Rate: Add 5ml per 20 litres of aquarium water. For Tetra species, baby fish and scaleless fish (loaches, etc). Use at the reduced rate of 5ml per 40 litres of aquarium water. Repeat after 3 days. TO GIVE NUMBER OF LITRES: To calculate approximate tank capacity multiple length x width x water level height (all in cms) and divide by 1000 or litres.   Disposal: Dispose of empty container by wrapping with paper and putting in garbage.   Storage: Store below 30C (Room Temperature). Replace lid tightly after use.   First Aid Instructions: For advice, contact the Poisons Information Centre (phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

Read more less

Fungal diseases are common in freshwater fishes and are recognised by white or grey threads on the skin or fins which may thicken until they resemble tufts of cotton wool (pin head size) on the fished body and fins. Unless prompt action is taken fatalities will occur.   Directions for Use: Do not use on fish intended for human consumption. A partial water change (25% capacity) is recommended before commencing treatment. Ensure aquarium water is well aerated and remove activated carbon from filtration system for the duration of treatment. Activated carbon will remove this product from the aquarium water resulting in ineffective. This product contains a dye product which will stain if spilled.   Dose Rate: Add 5ml per 20 litres of aquarium water. For Tetra species, baby fish and scaleless fish (loaches, etc). Use at the reduced rate of 5ml per 40 litres of aquarium water. Repeat after 3 days. TO GIVE NUMBER OF LITRES: To calculate approximate tank capacity multiple length x width x water level height (all in cms) and divide by 1000 or litres.   Disposal: Dispose of empty container by wrapping with paper and putting in garbage.   Storage: Store below 30C (Room Temperature). Replace lid tightly after use.   First Aid Instructions: For advice, contact the Poisons Information Centre (phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

Read more less

Aquasonic Frystarter has been specially formulated to feed newly hatched fry. It contains shrimp, fish, egg, vitamins and minerals, and has a variety of tiny food particles suitable for both livebearer and egglayer fry. When feeding, Frystarter stays in suspension longer, giving the fry a constant supply of food. Filtration should be maintained as an adequate safe guard against the risk of over feeding.    Directions for Use: Feed the newly hatched fry 3-4 drops, 3 times daily dependant on aquarium size and fry numbers. Careful observation will enable you to achieve the correct dosage for your particular species of fish. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Magna Clear will clear water in aquariums when water is cloudy or where gravel has dirtied the water. Ideal for new aquariums. Excellent for fish bowls. Magna Clear will assist filters in your aquarium to work more efficiently and also helps clear aquariums with insufficient filtration and bowls with no filtration. Magna Clear settles and collects suspended organic matter, which can then be easily siphoned off leaving your aquarium clear.   Directions for Use: 1ml per 20ml, (3 drops per 4L) for clearing cloudy or new aquariums.1ml per 40ml for improved filtration or to settle suspended organic matter.   Important: Dilute calculated dosage in a small quantity of water before dispersal into the aquarium. Airstones and filtration will help the dispersion. Only gentle agitation is required. Repeat if necessary after 24 hours. Do not use more than twice in 14 days.

Read more less

Water changes can be very tough on aquarium fish, often resulting in disease or even fatality. Protech has been formulated to effectively assist fish with recovery after a water change, transport or handling. Protech replaces slime coating and makes fish feel well by providing a powerful vitamin mix including: B1, B2, B6, B12, E, and A. This enables the fish to fight off disease and start feeding again quickly. Use during and after transport, after a water change, after any handling of fish or simply as a vitamin supplement. Fungal inhibitors have also been added to help guard against infections.   Directions for Use: 1ml per 20L for general use. For fish in a poor state use treatments as high as 1ml per 5L to assist in faster recovery. For transport use general dose rates. 1ml - approx. 15 drops. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less