Aquasonic Betta Water Conditioning Salts have been formulated to re-create natural conditions in your aquarium. It contains the correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors, to promote health and wellbeing.   Use Betta Water Conditioning Salts with new aquarium water, when starting up or doing a water change. It will raise General Hardness by approx. 80ppm and Salinity (NaCI) by 130ppm. Further addition of salt (NaCI) is not recommended.   Direction for Use: Add 5g (1 level teaspoon) per 15L of water. Re-seal container when not in use. Do not redose without a water change. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.   For aquarium use only. Keep out of reach of children.

Read more less

Aquasonic Betta Water Conditioning Salts have been formulated to re-create natural conditions in your aquarium. It contains the correct balance of salts, natural minerals and trace elements, plus bacterial and fungal inhibitors, to promote health and wellbeing.   Use Betta Water Conditioning Salts with new aquarium water, when starting up or doing a water change. It will raise General Hardness by approx. 80ppm and Salinity (NaCI) by 130ppm. Further addition of salt (NaCI) is not recommended.   Direction for Use: Add 5g (1 level teaspoon) per 15L of water. Re-seal container when not in use. Do not redose without a water change. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.   For aquarium use only. Keep out of reach of children.

Read more less

Water changes can be very tough on aquarium fish, often resulting in disease or even fatality. Betta Protech has been formulated to effectively assist fish with recovery after a water change, transport or handling. Betta Protech replaces slime coating and makes fish feel well by providing a powerful vitamin mix including: B1, B2, B6, B12, E, and A. This enables the fish to fight off disease and start feeding again quickly. Use during and after transport, after a water change, after any handling of fish or simply as a vitamin supplement. Fungal inhibitors have also been added to help guard against infections.   Directions for Use: 1ml per 20ml for general use. For fish in a poor state use treatments as high as 1ml per 5ml to assist in faster recovery. For transport use general dose rates. 1ml = approx 15 drops. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Betta Complete Water Conditioner will remove chlorine and chloramines and detoxify any heavy metals found in the water supply, plus it has an added fungal inhibitor to guard against infections to give your fish a safe and healthy environment.   Directions for Use: Add 2 drops per 1L of water when setting up your Betta (Fighting Fish) aquarium or when adding new water.

Read more less

Aquasonic Bio-Tet tablets are a broad spectrum antibiotic that treats disease in ornamental fresh & salt water aquarium fish caused by tetracycline sensitive bacteria.   Directions for Use: Do not swallow. Do not use on fish intended for human consumption. Remove activated carbon or other absorbent materials from filtration system and slow flow rate of sub-gravel filtration for the duration of the treatment.Use of an isolated treatment tank as a hospital tank for affected fish is recommended and ensure the water is as similar as possible to the main aquarium (pH, temperature, salinity, etc.) Aerate vigorously during treatment.   Dosage Rate: Use 1 tablet per 20 litres of aquarium water. If conditions do not improve, consult your veterinarian or aquarium dealer. Replace aquarium water after successful treatment. To calculate approximate tank capacity multiply length x width x water level height (in cm) and divide by 1,000 for litres.   CAUTION. Keep out of reach of children. For animal treatment only.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131126, New Zealand 0800 764 766 or a doctor (at once). If swallowed, and more than 15 minutes from a hospital, induce vomiting preferably using Ipecac Syrup APF.   Storage: Store below 30C (Room Temperature). Protect from light. Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping in paper and placing in garbage.

Read more less

Aquasonic Bio-Tet tablets are a broad spectrum antibiotic that treats disease in ornamental fresh & salt water aquarium fish caused by tetracycline sensitive bacteria.   Directions for Use: Do not swallow. Do not use on fish intended for human consumption.Remove activated carbon or other absorbent materials from filtration system and slow flow rate of sub-gravel filtration for the duration of the treatment.Use of an isolated treatment tank as a hospital tank for affected fish is recommended and ensure the water is as similar as possible to the main aquarium (pH, temperature, salinity, etc.) Aerate vigorously during treatment.   Dosage Rate: Use 1 tablet per 20 litres of aquarium water. If conditions do not improve, consult your veterinarian or aquarium dealer. Replace aquarium water after successful treatment. To calculate approximate tank capacity multiply length x width x water level height (in cm) and divide by 1,000 for litres.   CAUTION. Keep out of reach of children. For animal treatment only.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131126, New Zealand 0800 764 766 or a doctor (at once). If swallowed, and more than 15 minutes from a hospital, induce vomiting preferably using Ipecac Syrup APF.   Storage: Store below 30C (Room Temperature). Protect from light. Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping in paper and placing in garbage.

Read more less

Aquasonic Bio-Tet tablets are a broad spectrum antibiotic that treats disease in ornamental fresh & salt water aquarium fish caused by tetracycline sensitive bacteria.   Directions for Use: Do not swallow. Do not use on fish intended for human consumption.Remove activated carbon or other absorbent materials from filtration system and slow flow rate of sub-gravel filtration for the duration of the treatment.Use of an isolated treatment tank as a hospital tank for affected fish is recommended and ensure the water is as similar as possible to the main aquarium (pH, temperature, salinity, etc.) Aerate vigorously during treatment.   Dosage Rate: Use 1 tablet per 20 litres of aquarium water. If conditions do not improve, consult your veterinarian or aquarium dealer. Replace aquarium water after successful treatment. To calculate approximate tank capacity multiply length x width x water level height (in cm) and divide by 1,000 for litres.   CAUTION. Keep out of reach of children. For animal treatment only.   First Aid Instructions: If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131126, New Zealand 0800 764 766 or a doctor (at once). If swallowed, and more than 15 minutes from a hospital, induce vomiting preferably using Ipecac Syrup APF.   Storage: Store below 30C (Room Temperature). Protect from light. Replace lid tightly after use.   Disposal: Dispose of empty container by wrapping in paper and placing in garbage.

Read more less

Aquasonic Bio-Trace is an essential trace element supplement for marine aquariums. It contains a selection of trace elements found in natural seawater that are easily depleted within the confinements of a marine aquarium. Trace elements are essential for the health, growth and wellbeing of marine fish, corals and invertebrates. Use Aquasonic Bio-Trace weekly for best results.   Directions for Use: 1ml per 50L each week. Use no more than once a week and do not overdose. Treatment may begin when the aquarium is stocked but not before. Regular water changes must still be made. A water change of 25% or more per month is recommended. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

Aquasonic Bio-Trace is an essential trace element supplement for marine aquariums. It contains a selection of trace elements found in natural seawater that are easily depleted within the confinements of a marine aquarium. Trace elements are essential for the health, growth and wellbeing of marine fish, corals and invertebrates. Use Aquasonic Bio-Trace weekly for best results.   Directions for Use: 1ml per 50L each week. Use no more than once a week and do not overdose. Treatment may begin when the aquarium is stocked but not before. Regular water changes must still be made. A water change of 25% or more per month is recommended. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

For growth and vitality, Aquasonic Bio-Vit is a supplement containing many vitamins and amino acids, formulated to suit the requirements of marine life, especially corals, anemones and other invertebrates. The boost of amino acids and vitamins will enhance growth and vitality in all aquariums inhabitants. BIO-VIT provides marine aquariums with elements essential to protect and promote marine life. For strong aquarium inhabitants that flourish use Aquasonic Bio-Vit.   Directions for Use: For an established aquarium, 1ml per 50ml each week. For a new aquarium, 1ml per 10L of aquarium water. To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

For growth and vitality, Aquasonic Bio-Vit is a supplement containing many vitamins and amino acids, formulated to suit the requirements of marine life, especially corals, anemones and other invertebrates. The boost of amino acids and vitamins will enhance growth and vitality in all aquariums inhabitants. BIO-VIT provides marine aquariums with elements essential to protect and promote marine life. For strong aquarium inhabitants that flourish use Aquasonic Bio-Vit.   Directions for Use: For an established aquarium, 1ml per 50ml each week. For a new aquarium, 1ml per 10L of aquarium water.To calculate approximate aquarium capacity: Multiply the length x width x water level height (in cm) and divide by 1,000 for litres.

Read more less

What is Calcium? Calcium, scientific formula as Ca, is a very important element for most animal life, especially for corals and shellfish. It is the main cause of hard freshwater. Certain species of freshwater fish require certain levels of calcium. It is also the main ingredient in limestone, shellgrit and coral. Calcium, as an element, does not affect pH.   Normal Levels In seawater the level of calcium at normal specific gravity is 383ppm. If seawater is used at a lower specific gravity than normal, levels of calcium will be proportionally less. For freshwater aquariums please check appropriate text books, however all Aquasonic Water Conditioners have exacting amounts of calcium to suit designated species.   Calcium Build Up It is most important in both fresh and saltwater aquaria to set the levels of calcium when establishing the aquarium and then hold the appropriate levels by the addition, if necessary, of calcium in prescribed amounts. The use of shellgrit or coral rubble as a substrate or filter material can cause calcium levels to continually rise, to unacceptable levels.   Reef Aquariums A maximum level of 450ppm is recommended for Reef Aquariums. If the level is taken above this then Carbonate Hardness levels, the main reason for stable pH, may be affected. The calcium would precipitate the carbonate as calcium carbonate. Calcium is used by calcareous algae, corals and shellfish, so in some situations, levels may require constant replenishment.   To Set Calcium Levels In salt water, maintain levels with Aquasonic Ocean Nature Sea Salt. Normal specific gravity = 383ppm. Raise calcium in saltwater with Aquasonic Calcium-Sup. In freshwater, maintain levels with Aquasonic Water Conditioning Salts.   Directions for Use: To determine Calcium in Salt or Fresh Water. Read Instructions Carefully Before Use. The test kit has a dual range. Measurements can be made in steps of 25ppm or 50ppm.   Note: Seawater usually contains 350-450ppm of calcium.   To Test in 25ppm: Rinse a clean test tube several times in the water to be tested and fill to the 10ml mark. Add 1 level scoop of Reagent A and 4 drops of Reagent B. Shake until powder dissolves (about 1-2 minutes). Solution will turn bright red if calcium is present. Immediately add Reagent C a drop at a time, swirling to mix after each addition. Keep count of the number of drops until colour changes to the end point (see chart) and multiply this by 25 to give calcium in ppm.   To Test in 50ppm: Rinse a clean test tube several times in the water to be tested and fill to the 5ml mark. Add 1/2 scoop of Reagent A and 2 drops of Reagent B. Shake until powder dissolves (about 1 minute). Solution will turn bright red if calcium is present. Immediately add Reagent C a drop at a time, swirling to mix after each addition. Keep count of the number of drops until colour changes to the end point (see chart) and multiply by 50 to give calcium in ppm. *This colour chart provides a basic guide only. Colours may vary according to various water conditions.

Read more less